Duplo DFC-12 User Manual

41
15. WHEN ERROR MESSAGES ARE DISPLAYED
15-7. When "Paper Jam" is displayed
15-8. When "Stacker jam" is displayed
Paper has jammed in the conveyance route or paper ejection gate.
• Press the Eject key to eject the jammed paper.
• If paper does not come out even when the Eject key is pressed, open the vertical conveyance
cover and remove the jammed paper.
• If paper is jammed at the paper ejection gate, pull out the paper towards the front.
Press the Start key to restart operations.
Paper has jammed at the paper ejection
gate or paper receiving table when the
power was turned ON.
• Press the Eject key to eject the jammed
paper.
• If paper does not come out even when the
Eject key is pressed, open the vertical con-
veyance cover and remove the jammed
paper.
• Check that the lever of the paper ejection
sensor does not remain lowered.
Press the Start key to restart operations.
Conveyance route
Paper ejection gate
Vertical conveyance cover
Paper
Paper
Paper Ejection
sensor
Paper

Duplo DFC-12 Specifications

General

Brand	Duplo
Model	DFC-12
Category	Printer Accessories
Language	English