Duplo DFC-12 User Manual

28
1
Setting paper size
Paper size can be selected from A3, A4, A5, B4,
B5, LGR, LGL, LTR, INV, A3SR, custom 1, cus-
tom 2, and custom 3.
To set custom 1 to 3, the paper length and width
must be registered. For details, refer to "Setting
the custom size"
At shipment, “Paper size” is set to “A3”.
2
Press the key and display the
screen for selecting the paper size.
4
Press the key to return to the
standby screen.
3
Press the key and save the pa-
per size selected at step 2.
Press the key until the standby screen
is displayed.
Press the
key to display the
screen where the paper size to be set is
blinking.
To redo the setting, press the
key an-
other time to return to step 2.
Press the key and display
"Paper size".
Paper size saved
12. CONNECTING THE DOWNSTREAM UNIT
Note Some paper sizes cannot be selected
depending on the bound state.
If the paper size of your choice cannot be
selected, select the binding state first ac-
cording to "Setting binding method" on
page 27 and then set the paper size.
After completing settings, check the pa-
per size displayed at the standby screen.

Duplo DFC-12 Specifications

General

Brand	Duplo
Model	DFC-12
Category	Printer Accessories
Language	English