Duplo RTM-08 - Page 73

2
65
PC Controller Setting
4
Programming a JOB on a Computer
JOB No.
Select a JOB number from the
JOB No.
box.
JOB name
Enter a JOB name.
You can enter up to 50 characters and/or letters.
Usable characters and letters;
Alphabetical letters (A to Z, a to z)
Numerals
Symbols
3. Select a module from the
Slot 3
box.
Standard module
Slitter module
RTM (Rotary Tool Module)
4. If you have selected
RTM (Rotary Tool Module)
,
select tools for the right side and the left side.
Perf.: Perforation tool
Micro: Micro perforation tool
Score: Score tool
Category
Select a category in which to save the JOB from the
Category
box.
You can set a JOB number of 1 to 250.
REFERENCE
REFERENCE