DuraLabel.com | 800.788.5572
2.4 Loading Vinyl Supply | 13
LOADING THE PRINTER
E. Close the printer cover by slowly lifting up, then pressing down until it
latches shut.
F. Close the ribbon mechanism cover by pressing down and in until it latches shut.
Your printer is now loaded and ready to print.
Figure 5 Lift printer cover all the way up,
then press down until it latches shut.
Figure 6 Printer cover closed, with ribbon
mechanism cover open
Figure 7 Press down and in to close.
Figure 8 Loaded DuraLabel PRO 300 printer, ready to print
To Next Page
Loading...
