DuraLabel PRO 300 - Printer Specifications; Printer Model Specifications; Indicators and Buttons; Communication Interface

46 | 10.1 Printer DuraLabel.com | 800.788.5572
 6SHFLÀFDWLRQV
10.1 Printer
Type: Thermal Transfer
Print Speed (DLP 300): Selectable, 2" or 3" per second
Print Speed (DLP): Selectable, 2" – 5" per second
Resolution (DLP 300): 300 dpi
Resolution (DLP): 203 dpi
Maximum Print Width: 4"
Maximum Print Length (DLP 300): 56"
Maximum Print Length (DLP): 118"
Ribbon Capacity: 984'
10.2 Indicators and Buttons
Indicators: LED (Green, Amber, Red)
Buttons: Power and Feed
10.3 Communication Interface
Communications: USB v1.1, RS-232C (max. baud rate 19,200 bps) and Centronics
Memory: 2MB flash memory, 8MB DRAM
10.4 Power Requirements
Input Voltage: Switching power, 100 – 240 VAC, 50 – 60 Hz
Output Voltage: 24 VDC
Circuit Protection: 3.75A maximum
10.5 Environment
Operating Temperature: 41º F – 104º F (5º C – 40º C)
Operation Humidity: 25% – 85% non-condensing
Storage Temperature: -4º F – 122º F (-18º C – 50º C)
Storage Humidity: 10% – 90% non-condensing
Ventilation: Free air movement