20 | 3.3 Using a Parallel Cable
DuraLabel.com | 800.788.5572
CONNECTING THE PRINTER
3.3 Using a Parallel Cable
NOTE: You may need IT administrator privileges to install a driver.
The following instructions are only for those using a parallel cable:
A. Insert the DuraLabel PRO or DuraLabel PRO 300
Installation CD in your computer’s disk drive. A
DuraLabel PRO/PRO 300 startup screen appears.
NOTE: If the CD does not run automatically, go to Start >
Computer and double-click on your CD/DVD drive, which
should show the DL icon.
B. Click on Driver Wizard, then click Next on the new Driver Wizard window.
C. Click I Agree on the Windows Printer Driver License Agreement window that
appears.
D. Select DuraLabel PRO or DuraLabel PRO 300 and click Next on the
DuraLabel Driver Setup window that appears.
E. Choose the install location and click Install on the Choose Install Location
window that appears. An Installing window shows installation progress.
FIGURE 1 DuraLabel PRO 300 Startup
Screen
FIGURE 2 DuraLabel Driver Setup Wizard
FIGURE 3 Windows Printer Driver License
Agreement
FIGURE 4 Selecting a DuraLabel Driver
FIGURE 5 Driver Install Location Window
FIGURE 6 Installing Window
FIGURE 7 Install Printer Driver Window
To Next Page
Loading...
