DuraLabel PRO 300 - Page 5

DuraLabel.com | 800.788.5572 Contents | 3
CONTENTS
8. Cleaning and General Maintenance 38
8.1 Print Head 39
8.2 Cutter 39
8.2.1 Cleaning Cutter from the Inside 39
8.3 Platen Roller 41
9. Troubleshooting 42
9.1 LED is Solid Red 42
9.2 Printing Suddenly Stops and LED Blinks Red 42
9.3 LED Quickly Blinks Red 42
9.4 Printing Stops While Printing Die-cut Labels and LED Blinks Red 43
9.5 LED Blinks Green after Label is Printed 43
9.6 After Printing a Label, Printer Dispenses Extra Supply and LED Blinks Red 43
9.7 Printing is not Aligned Correctly 43
9.8 Printing is Streaked 44
9.9 LED Blinks Amber and Red 44
9.10 Printer Cuts Labels Off-Center or into Next Label 45
10. Specifications 46
10.1 Printer 46
10.2 Indicators and Buttons 46
10.3 Communication Interface 46
10.4 Power Requirements 46
10.5 Environment 46
10.6 Label Supply 47
10.7 Ribbon Supply 47
10.8 Printer Body 47