Performance description
Operating manual 281 Version 06.0 - 05/2013 9
3 Performance description
3.1 Features
The Dürkopp Adler 281 is a single-needle double lockstitch
machine with lower transport for light to moderately heavy
material.
General technical characteristics
• Comes with standard E2/20 sewing equipment (E2/16 for
China)
• Integrated sewing drive on the upper shaft
• Maximum sewing speed:
4000 or 5000 st/min (depending on submodel)
• Maximum stitch length 4.5 or 6 mm (depending on submodel)
• Sewing foot pressure adjustable with adjusting wheel
• Electromagnetic thread cutter
• Electromagnetic thread clamps, can be activated on the
control panel
• Electromagnetic automatic tying stitch
• Integrated operation lock for sewing drive when the upper
part is pivoted
• Integrated winder
3.2 Declaration of conformity
The machine complies with the European regulations specified in
the declaration of conformity or in the installation declaration.
3.3 Intended use
The Dürkopp Adler 281 is intended for sewing light to moderately
heavy material.
Intended yarn counts:
• 30/3 NeB (cotton threads)
• 30/2 Nm (synthetic threads)
• 30/3 Nm (core spun thread)
The machine is only intended for processing dry material and may
only be operated in dry areas.
The material to be sewn must not contain any hard objects.
The sewing machine is intended for industrial use.
The manufacturer will not be held liable for damage resulting from
improper use.
To Next Page
Loading...
Need help?
General
