Operation
Operating manual 281 Version 06.0 - 05/2013 17
5 Operation
5.1 Switching the power supply on and off
The controller is underneath the table plate. The main switch (1)
on the controller regulates the power supply.
Figure 2: Switching the power supply on and off
To switch on the power:
1. Press the main switch (1) down to position I.
The indicator lamp (2) lights up.
To switch off the power:
1. Press the main switch (1) up to position 0.
The indicator lamp (2) goes out.
(1) - Main power switch
(2) - Indicator lamp on the controller
①
②
To Next Page
Loading...
