Operation
Operating manual 281 Version 06.0 - 05/201320
5.3 Threading in the needle thread
Figure 4: Thread guide on the unwinding bracket
1. Fit the thread reel on the thread stand (2).
2. Insert the thread from the rear to the front through a hole in
the guide on the unwinding bracket (1).
Important: The unwinding bracket (1) must be parallel to the
thread stand (2).
Risk of injury by the needle point and moving
parts.
Switch off the sewing machine before inserting the
thread.
WARNING
(1) - Guide on the unwinding
bracket
(2) - Thread stand
①
②
To Next Page
Loading...
