DURKOPP ADLER 281 - 5.9 Setting the sewing foot pressure

Operation
Operating manual 281 Version 06.0 - 05/2013 33
Figure 17: Setting the thread regulator
Setting the thread regulator
1. Loosen the fastening screws (2).
2. Move the thread regulator (1):
• Lower thread quantity:
Slide the thread regulator (1) to the right
• Larger thread quantity:
Slide the thread regulator (1) to the left
3. Tighten the fastening screws (2).
(1) - Thread regulator (2) - Fastening screws
①
②