6.7 Fitting the proximity switch (class 367-170115; -170315; -180115; -180315 only)
–
Push the proximity switch onto the handwheel flange so that the
retaining pin on the belt guard engages in its groove.
–
Secure the proximity switch with the two screws.
6.8 Connecting the machine head (class 367-170115; -170315; -180115; -180315 only)
–
The 9870 367001 cable is plugged onto the 9850 367001
distributor in the upper part and passed down inside the upper part.
–
Plug the 37-pole plug of the cable into socket A of the sewing drive
and secure with the screw.
21
21
To Next Page
Loading...
Need help?
General
