Operation
Operating Manual 512/532 Version 00.0 - 12/2013 21
4Operation
4.1 Threading needle thread
1. Plug the thread reels onto the thread reel holders and feed the
needle and hook threads through the unwinding bracket.
The unwinding bracket must stand horizontally above the
thread reels.
2. Thread the needle thread as shown in the following figure.
Figure 1: Threading needle thread
3. Pull the needle thread approx. 4 cm through the needle after
threading. This ensures reliable sewing-on.
4. When using silicone oil, also thread the needle thread through
the optional silicone oiler (1).
CAUTION
Risk of injury from needle and moving parts
Only thread the needle thread with the sewing
machine switched off.
(1) – Silicone lubricator (optional)
(2) – Guide
①
②
To Next Page