DURKOPP ADLER 512 - Switching on the Sewing Machine

Settings via the software
Operating Manual 512/532 Version 00.0 - 12/201336
5.2 Switching on the sewing machine
1. Main power switch ON.
 The last seam appearance sewn is loaded and the seam
appearance number is shown in the Program display.
(4) Reset button
Delete an error and restore settings.
(5) Ready button with LED
Switch between programming and sewing mode.
LED on = sewing mode
LED off = programming mode
(6) Error LED
LED on = error
(7) Program display
Display parameters.
(8) +/– Program buttons
Change parameters and navigate forwards / backwards.
(9) Function display
Display values for selected functions / programs.
(10) +/– Function buttons
Change values of functions / programs.
(11) Select button
Select different functions. The respective function LED illuminates.
(12) Seam appearance memory
Save the seam appearance.
Button / LED Pos. Function