DURKOPP ADLER 512 - Mount the Hood; Fit the Eye Protection

Setup
Operating Manual 512/532 Version 00.0 - 12/2013 79
8.3.11 Mount the hood
Figure 27: Mount the hood
1. Screw the hood (1) to the upper section using 4 screws (2).
8.3.12 Fit the eye protection
Figure 28: Fit the eye protection
1. Screw the eye protection (2) to the upper section using
2 screws (1).
①
②
(1) – Hood (2) – Screw
②
(1) – Eye protection (2) – Screw
①