Order No. Optional equipment A B D F
0745 597824 Smoother for the 745-34-2 A/B
The smoother has the purpose to s mooth the finished
workpiece held by the bundle clamp. Only in
combination with the table extension 0745 597674
and the roll-off device 0745 597954.
XX
0745 597874 Set of parts “Pocket bag on flap” NA 10 and 12
for the simultaneous attaching of two pocket bag
halves and flap. Combination only in conjunction with
equipment E 3103 or E 3503 for NA 10
as well as E 3107 or E 3507 for NA 12.
X
0745 597884 Set of parts “Pocket bag / Piped pocket”
for the blowing of the pocket bag or the piping pocket
with equipment E 2604 or E 2606.
Use only in combination with the clamp K19.
X
0745 597934 Three-pack lasers
Add-on kit: for expanding the existing 5 laser marking
lamps to a maximum of 8 laser marking lamps.
(With the working method F, the standard equipment
includes 8 laser marking lamps).
XXXX
0745 597944 Electromotoric tape feed/Automatic cutting
Automatic feeding and cutting of a
reinforcement strip pulled from a roll. Start time and
cutting time can be programmed
corresponding to the pocket.
XXXX
0745 597954 Roll-off device
It is used to for transporting short pieces into the
stacker or to eject the pieces to be processed.
The speed and the working cycle of the roll-off device
can also be programmed.
XXXX
0745 597964 Vacuum (side channel compressor)
For an accurate positioning of the material when
no in-house vacuum unit is available.
The side channel compressor can be used with the
basic unit.
XXXX
0797 003031 Pneumatic connection package
Connection hose to the pneumatic supply line
with the appropriate couplings.
XXXX
0745 517564 Automatic feeding, left 180 - 220 mm
For the automatic feeding of piping strips and
additional parts.
X
0745 517574 Automatic feeding, right 180 - 220 mm
For the automatic feeding of piping strips and
additional parts.
X
0745 598054 Kit second light barrier
X
1
9
To Next Page
Loading...
Need help?
General
