DURKOPP ADLER 745-34-2 User Manual

2.11 Slanted pocket corners
Dependent on the working method the 745-34-2 is equipped with an
automatic or manual corner knife station.
0745 337524 Manual corner knife station
The setting of the corner knives with regard to the pocket length is
programmable and is effected via a step motor.
The slanted pocket corners result from the seam offset of the two seam
rows programmable in steps of 1 mm.
The pocket corner incision can be manually adjusted by two knurled
screws. For the seam beginning and seam end it amounts to a
maximum of +/- 13 mm relative to the second seam.
The distance of the corner knives to the seam is manually adjustable.
The whole knife block can be tilted out to make setting and service
work possible.
0745 337534 Automatic corner knife station
The setting of the corner knives with regard to the pocket length is
programmable and is effected via a step motor.
The slanted pocket corners result from the seam offset of the two seam
rows programmable in steps of 1 mm.
The programmable pocket corner incision - adjustable via two step
motors - can be freely selected for the seam beginning and seam end
and amounts to a maximum of +/- 13 mm relative to the second seam.
The distance of the corner knives to the seam is manually adjustable.
The whole knife block can be tilted out to make setting and service
work possible.
26

DURKOPP ADLER 745-34-2 Specifications

General

Brand	DURKOPP ADLER
Model	745-34-2
Category	Sewing Machine
Language	English