Sew ing w ith the flap on the right (Production of trousers)
–
When manufacturing trousers always position the flap at the “Rear
positioning point” (light spot 5).
The “Rear positioning point” is a fixed point also for other sewing
units (further flap lengths).
–
Attach the positioning mark 4 for the hind trousers on the fabric
sliding sheet correspondingly.
–
The sketch shows the positioning of a right hind trousers part 3
with flap.
–
Position the left hind trousers parts in reflected image.
The position of the flap remains the same.
38
4
56
5
3
4
To Next Page
Loading...
