44
6. Step forward on the pedal.
The folder 20 lowers.
7. Position the flaps on the left feeding clamp at the stop 14 and
align in sewing direction.
Left jacket front parts:
Position flap 5 at the rear stop 13 of the folder 20.
Right jacket front parts:
Position flap 5 at the front stop 8 of the folder 20.
8. Step forward on the pedal.
Flap clamp 18 closes.
9. Step forward on the pedal.
Flap clamp 19 closes.
Thesewingcyclestarts.
ATTENTION!
The steps 8 and 9 are dependent on the closing order of the flap
clamps set in the pocket parameters.
See Programming Instructions, chapter 6.4.
To Next Page
Loading...
