Programming
Service Instructions 745-35-10 S/745-35-10 A - 02.0 - 04/2017 233
Select pedal mode
The display switches to Select pedal mode
Fig. 201: Select pedal mode.
To select pedal mode:
1. Press the desired button.
Symbols Meaning
Press pedal 1 x and keep it there
• the loading process is completed without stop
Push pedal after each step
• Vacuum, downholder and transport clamp are each triggered with
one step during the loading process
• the sewing process starts after the transport clamps have been
triggered
Transport clamp start after pushing pedal
• Vacuum, downholder and transport clamp are each triggered with
one step during the loading process
• The flap clamps can be opened or closed again after the transport
clamps have been triggered, and the sewing process can be started.
To Next Page
Loading...
