Dynamica HALO DB-20 - Set Time

11/15/02 11:15 600.0 nm 0.854 ABS
Calibration
1 WL Calibration
2 Set Time
3 Lamp Time
4 GLP/GMP
Are you sure to excute?
3.8.2 Set Time
If the time displayed on the LCD screen is incorrect, reset the clock using the
following steps.
Press <2> key on the keyboard from the Calibration submenu. Then the time
setting submenu appears on the right of the screen as shown below.
11/15/02 11:15 600.0 nm 0.854 ABS
Calibration
1 WL Calibration 1 Minute 15
2Set Time 2Hour 11
3 Lamp Time 3 Day 15
4 GLP/GMP 4 Month 11
5 Year
6 Clock ON
7 M/D/
Y
Select Function: _
Display Format
1 Y/M/D 2 M/D/Y 3 D/M/Y
3-59