3.2.2 Main Menu
After initialization, the LCD will enter into the interface which last interface
before power off. Press Main Manu key and the Main Menu screen appears on
the display as shown in the below.
The Main Menu lists seven options plus Wavelength and photometric value
displayed on the top of the screen. To guide you through each procedure, there
is a prompt displayed at the bottom of each screen page. The function of each
option item refers to chapter 2.
05/11/02 11:35 600.0 nm 0.854 ABS
Main Menu
1 Photometry
2 Wavelength Scan
3 Time Scan
4 Multiple WL
5 File Manager
6 Calibration
7 Test Menu
Select Function: _
Selecting Options from the Main Menu
You can access a desired option in one of two ways:
1. The numeric key as the function key, just press the number, such as Press
<1> to start the Photometry sub menu.
2. Press Main Menu key to return the Main menu.
3-4
To Next Page
Loading...
