1-4
DB-20 Main unit
Operation Manual
Power cord with fuse
Standard cuvette holder for DB-20
Dust cover
One Philips and one minus screw drivers
If any part is missing or damaged, or if you have a question, contact the nearest
Dynamica sales representative.
Fig. 1-2 Standard Accessories
ote: The standard accessories are subject to change for improvement without
previous notice.
Check them for proper quantity against the packing list furnished
1.4 Check of Voltage and Fuse
Please first check if the line voltage is suitable for the line voltage allowed using
labeled beside the power connector.
Warning: Before proceeding to the work, make sure the power cord is not
connected to the wall socket.
Note: There is the voltage selector switch to select the line voltage allowed to
use.
Confirmation of the Fuse
To Next Page
Loading...
