Dynamica HALO DB-20 - Automatic Start Function; Automatic Calibration and Self - Diagnosis Functions; Specification

2.4.6 Automatic Start Function
When the automatic start function is set in advance, the operator need only turn
on the power switch (measuring conditions are set automatically), set a sample
in the instrument and then press the START key.
The rest is done automatically.
2.4.7 Automatic Calibration and Self – Diagnosis Functions
a) Memory (RAM and EPROM) check
b) Wavelength drive mechanism check
c) Lamp ignition check
d) Automatic wavelength calibration
Wavelength is automatically calibrated with reference to that of the
beam emitted from the D2 lamp.
e) Baseline Correction
2.5 Specifications
2-8