Dynamica HALO DB-20 - Test Menu; Retrieving a Test Stored in Inside Memory; Deleting Test from Inside Memory

3.9 Test Menu
Press [7] on the keyboard to enter the Test Menu mode. The Test Menu
submenu will be displayed on the LCD as shown below.
11/28/02 12:38 600.0 nm 0.854 ABS
Test Menu
1 Load Test File
2 Delete Test 1 P01 UTQ 11
3 Set Autostart 212
313
414
515
616
717
818
919
10 20
Input File No.
(0-20)
3.9.1 Retrieving a Test Stored in Inside Memory
You can retrieve a test method that you have stored in Inside memory by
following steps:
Press <1> on the keyboard to select the Load Test, and a file list will appear on
the side of the screen.
Select the desired test number using the UP and DOWN arrow key and then
press ENTER. The operating parameters for the selected test are initiated
automatically and the screen then advances immediately to the START position.
3.9.2 Deleting Test From Inside Memory
Press [2] on the keyboard to select the Delete Test, and a file list will appear on
the side of the screen.
3-65