3.6 Multiple WL
Note: When the sample is volatile liquid, pleas must cover the sample cell
with lid. Don’t measure the combustible liquid or gas with this
instrument.
Press [4] on the keyboard to enter the Multiple WL option from the main menu.
The Multiple WL submenu will be displayed on the LCD as shown in the
illustration below.
11/12/02 15:38 600.0 nm 0.854 ABS
Multipl WL
1 Parameter Setup
2 Sample Setup
3 Curve Setup
4 Print Setup
5 System Setup
6 Save Parameter
7 User Baseline
0 Forward
Select Function:_
3.6.1 Measurement Conditions Setting
1. Parameter Setup
Press <1> to select parameter setup from the Multiple WL Sub Menu and a
sub menu list will appears on the right side of the screen as shown in the
illustration below. Press numeric key to select corresponding function.
3-46
To Next Page
Loading...
