(2) Remove the fastening screw from the side face of the light source cover, and
then remove the cover. (See Fig. 5-1)
Fastening Screw
Fig. 5-1 remove the cover
After open the cover, the source lamp can be seen as fig. 5-2.
D2 lamp
WI lamp
Fig.5-2
(3) Replacement of WI Lamp
Loosen the retainer spring, and then pull it out. Push in a new lamp to the
extreme end of the lamp holder.
Fig. 5-3 Remove the WI Lamp
5-2
To Next Page
Loading...
