11/04/02 9:44 600.0 nm 0.854 ABS
Wavelength Scan
1 Parameter Setup 1Name SAMP-1
2 Sample Setup 2 Path Length (nm) 10.0
3 Print Setup
4 System Setup
5 Save Parameters
ne
0 Forward
Input Name:_
Name
ring Sample name.
pecifiable. It can input “0-9”, “A-Z”, “-”, “/”, “:”.
m)
t was preformed using a cell other than 10 mm rectangular
. Print Setup
elect system setup from the Wavelength Sub Menu and a sub menu
Measu
Up to eight characters are s
Path length (m
When measuremen
cell, the photometric value can be converted into one measured with a 10 mm
rectangular cell.
3
Press <3> to s
list will appears on the right side of the screen as shown in the illustration below.
3-23
To Next Page
Loading...
