0.200
2X- Min 0
3 Y- Max 0.410 ABS
4 Y- Min -0.068
-0.068
0.000 MG/L 0.200
Select Function: _
The abscissa is the concentration and the ordinate is difference of ABS.
Note: The “+” marks indicating the measured points.
Saving a Standard Calibration Curve
After creating a new standard curve, press Clear/Return to return the
measurement screen. Then press <2> to save the test.
Measuring the Unknown Sample
After saving the test, press <1> on the keyboard. The prompt “Insert Sample and
Press Start to Measure or Return to exit” will appear on the bottom of the screen.
Then, insert a sample and press Start. Repeat the procedure for multiple sample
measurement. The measurement results will be displayed on the screen.
3-54
To Next Page
Loading...
