123 Eaton® 9390 (100–160 kVA) UPS Installation and Operation Manual 164201604—Rev F
1100..55 SSuuppeerrvviissoorryy CCoonnttaacctt MMoodduullee ((SSCCMM))
An optional establishes an interface between the UPS system and the customer's monitor. This interface
allows the customer to monitor operational status of the UPS system equipment. The SCM can be flush–
mounted or surface–mounted on a desktop, or secured to a wall. Figure 77 shows the SCM.
FFiigguurree 7777.. SSuuppeerrvviissoorryy CCoonnttaacctt MMoodduullee
The SCM provides signals for the indications shown in Table 5.
TTaabbllee 55.. SSCCMM SSttaattuuss IInnddiiccaattoorrss aanndd CCoonnnneeccttiioonnss
IInnddiiccaattiioonn TTBB--22 CCoonnnneeccttiioonnss
SYSTEM NORMAL
TB2-1 through TB2 3
NO REDUNDANCY TB2-4 through TB2 6
ON GENERATOR TB2-7 through TB2 9
BYPASS NOT AVAILABLE TB2-10 through TB2 12
ON BATTERY
TB2-13 through TB2 15
UPS ALARM TB2-16 through TB2 18
ON BYPASS TB2-19 through TB2 21
SHUTDOWN IMMINENT TB2-22 through TB2 24
Using Features and Options
To Next Page
Loading...
