83
EA(B)O-6X06 01/2018 Rev. 1 3. Disassembly and Assembly
62346233
6237
6236
6238
13. Install the positioning ball of the 1st speed gear thrust
washer.
14. Install the 1st speed gear thrust washer, aligning the slot
on the washer with the positioning ball.
15. Install the thrust washer snap ring.
16. Install the double needle bearing of the reverse speed
gear.
NOTE: Lubricate the bearings with oil for the
gearbox.
Mainshaft
To Next Page
Loading...
