90
3. Disassembly and Assembly 01/2018 Rev. 1 EA(B)O-6X06
6275
6277
6276
6278
43. Install the 4th speed gear thrust washer snap ring.
44. Install the two needle bearings of the 6th speed gear.
NOTE: Lubricate the bearings with oil for the
gearbox.
45. Install the 6th speed gear with the cone side facing the
synchronizer hub.
46. Install the 6th speed synchronizer ring on the gear cone,
with the teeth facing towards the gear.
Mainshaft
To Next Page
Loading...
