Eaton ePDU G3 - Outlet-User Access and Session Management; Overview and Data Review

Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 94
Chapter 8 Web Interface Operation
This chapter describes remotely configuring, managing, and monitoring an Eaton Enclosure Power Distribution
Unit (ePDU) G3 remotely through the ePDU Network Management and Control (eNMC) module Web interface.
Thi
s chapter describes the following:
l
Navigating the Web interface
l
Accessing the Web interface
l
Configuring settings and monitoring the ePDU
NOTE When the Web browser is set to 100% (full page), we recommend setting your
screen resolution to a minimum of 1024 x 768 for the best display performance.
Navigating the Web Interface
The graphical Web interface is used to remotely monitor or configure the ePDU (see Figure 70). The Web
interface that corresponds to the ePDU topology type displays. This section describes the functions provided
by this interface.
5
21
3
6
7
8
4
9
10
Figure 70. Navigating the Web Interface (Opening Page)