Eaton ePDU G3 - Alarms History, Meter, and ePDU Submenus

LCD Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 47
Alarms History Menu
The Alarms History menu allows you to scroll through the last 50 logged alarms, beginning with the most recent
alarm. The Alarms History screens contain the type of alarm, the date (MM/DD/YYYY), and time (hh:mm:ss)
when the alarm occurred (see Figure 45).
On the Main Menu, scroll up or down to highlight Al
arms History. Press ENTER to display the most recent
alarm in the history log. Scroll up or down to view the alarms. When you finish your review, press ESC to return
to the previous menu.
ESC
Enter
Down
Down
Temperature high
warning
07/07/2011
01:05:44
Alarms History
Alarms History
Input frequency
out of range
09/05/2011
14:23:32
Alarms History
Input current high
warning
09/05/2011
14:23:32
Alarms History
Meter
Settings
Control
ePDU Info
Active Alarms
Main Menu
Alarms History
Figure 45. Example Alarm History Displays
Meter Menu
The Meter menu provides measurement data for the following submenus:
l
ePDU
l
Sections (not available for sections that do not have current measurement)
l
Outlets (not available for MI and SW ePDUs)
l
Environment (only available if an EMP is installed)
On the Main Menu, scroll up or down to highlight Me
ter. Press ENTER. Scroll up or down to select a submenu
and press ENTER to display the submenu options. Press ESC to return to the previous menu.
Alarms History
Meter
Settings
Control
ePDU Info
Active Alarms
Main Menu
ESC
Enter
ePDU
Environment
Meter
Sections
Outlets
Meter
Figure 46. Example Meter Menu Display
NOTE The measurement data for each screen is refreshed every two seconds.
ePDU Submenu
These screens display Total Input data measurements for ePDUs. In addition to Total Input measurements, you
can view Phase Input data measurements for 3Ph, split-phase, and dual input ePDUs. Depending on the ePDU
ele
ctrical topology, different ePDU measures will display in the Total Input and the Input Phase meter screens.