Eaton ePDU G3 - Firmware Upgrade via USB

Web Interface Operation
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 124
3. Select the LDAP Server Type, User Search Bind, and Authorization Mode values from the drop-down list:
l
LDAP Server Type: Allows you to select a configuration.
- Active Directory: Allows to configure a typical AD configuration. Some fields are read-only (User
Object and User Attribute are disabled).
- Other: All fields are editable.
l
User Search Bind: Defines if a special user for the LDAP searches must be used.
- Anonymous Search: Search bind uses an anonymous way (Search User and Password are disabled)
- User bind Search: Uses an LDAP user.
l
Search User: DN (if Bind Type = simple) or the username (if Bind Type = MD5) of the LDAP user
allowed to search in the LDAP dictionary.
l
Password: Password of the Search User.
l
User Base DN: Entry of the LDAP dictionary where to start the user search.
l
User Object: Object class of the LDAP users.
l
User Attribute: Login identifier.
l
Authorization Mode: Choose authorization by user attribute or by group.
- By User attribute: Stores the group name in the user attribute (Group Name Attribute).
- By Group: Stores the group name in the group LDAP object (UPS Group Base DN).
l
UPS Group Base DN: LDAP dictionary entry from which the group search starts.
l
Group Name Attribute: LDAP attribute that stores the group name.
l
User Name Attribute: LDAP attribute that stores the users names linked to this group.
4. The resulting required field entries are active and highlighted. Type the associated values in the active
entry boxes.
5. Click Save.
Set LDAP Server Global Parameters
1. Access the Web interface and log in.
2. Under Network and Security, select LDAP. The LDAP page displays.