Operation Overview
Eaton ePDU G3 Operation Manual P-164000277—Rev 1 www.eaton.com/ePDU 36
Figure 31. Reset the eNMC Module from the Web Interface
For a hardware restart, locate the Reset opening (labeled R) on the ePDU (see Figure 32). Insert a probe, press
the recessed button, and retract the probe. This method is not necessarily the best choice because the
communications module does not force the system to save the paramet
ers in the file system before restarting.
The H/W restart button does not affect ePDU outlet status. The energy consumption is still recorded during the
reboot of the eNMC module.
NOTE When using a hardware restart to restart the eNMC module, there is no mandatory
check to ensure that the file system parameters are saved before restarting.
To Next Page
Loading...
