Eaton FSO-2105 - Page 17

Lubrication Information
12
Draining
Drain transmission oil while the oil is warm. To drain
oil, remove the magnetic drain plug.
Clean the drain plug before re-installing it.
Relling
FSO-2105/02
Clean case area around oil ller plug, remove the
plug and rell the transmission until lubricant is level
with the bottom of the ller plug hole.
Note: The amount of oil varies with the position of
vehicle related to the ground and the installation
angle of transmission. Before relling, place vehicle
on a at and level surface. Fill up transmission until
lubricant begins to leak through the ller plug.
Lubricant oil volume: 2.7 to 3.3 liters
Correct Oil Level
Incorrect Oil Level
Oil level inspection
Before checking oil level, clean case area around
ller plug and if necessary, add enough oil to maintain
the proper oil level.
WARNING! Do not mix lubricant of different types
and brands, as this may cause incompatibility issues.