Tool Information
26
Universal Tools
To properly servicing the FSO-2105 and FSO-2505 transmissions, it is recommended the use of following univer-
sal tools.
Tapered section snap ring pliers
Constant section snap ring pliers
T-handle 1/2” square drive x 12’’ long
Ratchet-type wrench 1/2” square drive
Allen wrench 12 mm
Combination wrench open/box end 11 mm
Combination wrench open/box end 13 mm
Combination wrench open/box end 19 mm
Open end wrench 16 x 17 mm
Open end wrench 21 x 23 mm
Screw driver 12”
Hand scraper
Ratchet extension 1/2” square drive x 10” long
Ratchet extension 1/2” square drive x 4” long
Magnet
Sandpaper sheet 240 grit
Ball pein hammer 300 g
Plastic-tip hammer (soft mallet)
Center punch
Three-edged scraper
Roll-pin punch 4 mm
Roll-pin punch 6 mm
Socket 1/2” square drive x 11 mm hex
To Next Page
Loading...
