Gear Shift Lever Housing
Gear Shift Lever Housing
43
Gear shift lever housing disassembly
Replace all internal parts, but gear shift lever. Inspect
the gear shift lever for wear and replace it if worn. In
case the housing should be replaced, get a complete
assembly from your dealer.
1. Remove the four retaining capscrews from the
gear shift lever housing and remove gear shift
lever housing assembly from the transmission.
2. Remove the boot.
3. From the housing, remove locating pin, spring
and threaded plug.
4. From the housing, remove the two threaded pins.
819
827
836
840
5. Remove gear shift lever by hands and remove
the pivot pin from the lever.
6. Remove gear shift lever pivoting support and
thrust washers.
848
851
To Next Page
Loading...
