Front Section
Front Section
71
Description
The reverse shifting interlocking mechanism prevents
the driver from shifting accidentally into reverse
speed when downshifting from 5th to 4th speed.
Reverse Shifting Interlocking System
626
The mechanism comprises a lock device installed
in the front case working together with the shift
selector bar. When the 5th/ reverse speed yoke bar
is positioned into 5th speed, the lock mechanism
is actuated by the spring avoiding the return of the
bar and so preventing the reverse speed from being
straight shifted. To deactivate the locking mechanism,
just gearshift to neutral and then to reverse speed.
608
4. Use pliers and pull the bushing out from the
bushing bore.
Installation
1. Place the bushing on the special tool E001010.
2. Position the bushing in the bushing bore and
install the bushing by hitting the tool until it rest
against the housing. This condition gives the
proper bushing depth.
3. Use a center punch and lock the bushing by
punching the housing material in four positions
around the bushing bore.
WARNING! When locking the bushing, be careful
not to damage the bushing itself.
4. Apply a thin coating of recommended grease to
the bushing inner diameter.
EA057
EA055
EA055
Reverse shifting
interlocking
mechanism
3rd/4th yoke bar
Spring
Shift selector bar Lock
To Next Page
Loading...
