Front Section
Front Section
81
391
4. The middle synchronizer ring is installed with lugs
facing to the gear and should t into gear cone
holes.
5. The inner synchronizer ring is installed with lugs
facing to the synchronizer hub and should t into
hub slots.
451
429
454
3rd/4th Speed Synchronizer
Both the 3rd and the 4th speed synchronizer rings
have the special EFM II coating.
Spring (3x)
Key (3x)
Synchronizer hub
Synchronizer sleeve
Disassembly
1. With the hands, remove the synchronizer sleeve
from the hub.
EA075
388
Synchronizer
ring with EFM II
coating (2x)
To Next Page
Loading...
