Introduction
Introduction
1
Purpose and Scope of the Manual
This manual is designed to provide detailed information necessary to service and repair Eaton® transmissions
FSO-2105 and FSO-2505.
How to Use this Manual
Disassembly and assembly instructions in this manual make use of a typical FSO-2105 or FSO-2505
transmission. Provided illustrations and pictures show parts that may differ from one transmission model to
another, according to its application and serial number.
In addition, it is also assumed in the manual that the transmission has been removed from the vehicle and the
lubricant has been drained.
The manual has been divided into two main groups as follows:
1. Information and technical references, placed all together into one section.
2. Disassembly and assembly instructions, by its turn, divided into sections gathering specic component
assemblies.
For the complete disassembly and assembly of the transmission, follow the manual in its natural sequence.
However, if only a component should be serviced, locate in the index the section to which the component
belongs and the page number referring to it.
For more detailed information on product improvement, repair procedures and other subjects related to service,
please contact:
Eaton Ltda. – Transmission Division
After Sales & Service Support
Rua Clark, 2061 – PO Box 304
13270 - Valinhos - São Paulo - Brazil
Phone: 0800-170551
Fax: +55 19 3881-9858
WARNING! Eaton reserves the right to make modications in its products and to change specications included
in this manual at any time without previous notice.
To Next Page
Loading...
