Eaton FSO-2105 - Page 55

Rear Section
50
24. Remove pivot pins of the 5th/reverse speed shift
yoke.
136
136
25. Push the 5th/reverse speed shift yoke towards
the synchronizer in order to loosen it from the
linked shift block. Lift the yoke end and remove
the yoke by pulling it upwards.
138
26. Remove the 5th/reverse speed synchronizer hub
snap ring from the countershaft.
27. Remove the 5th/reverse speed synchronizer
assembly.
138
28. Remove the 5th speed synchronizer ring.
29. Remove the 5th speed gear from the
countershaft.
139
140
30. Remove the 5th speed gear needle bearing from
the countershaft.
31. Remove the 5th speed gear thrust washer from
the countershaft.
143
147