Rear Section
58
34. Install the thirteen retaining capscrews of rear
case to the intermediate housing. Tighten
capscrews crosswise to the proper torque.
Note: Apply Eaton 677 sealant to capscrew
threads.
Torque = 19-25 N.m (14-19 lb.ft)
35.
Install the speedometer sensor.
Note: Apply Eaton 680 or Eaton 679
sealant to sensor threads
Torque = 10-16 N.m (7-12 lb.ft)
029b
029b
36. Install the plug, spring and spherical actuator pin
of the cam threaded actuator, using the special
socket E018001.
030
EA029b
766
37. Align the shift lug with the gear shift bar matching
the roll pin holes and install the retaining roll pin
using tool E001045.
38. Install the gear shift lever housing assembly
onto the transmission. Refer to “Gear Shift Lever
Housing”, in this manual.
822
To Next Page
Loading...
