Eaton Fuller FSO-2405 - Oil Seal Replacement

100
Oil Seal Replacement
3
Rear Section 2nd Ed. 02/07 FSO-2405
FSO-2405/71
FSO-2405/70
1
2
Removal
1. Use pry bars or screwdriver to remove the oil
seal.
NOTE: The removed oil seal should not be
reused.
Installation
NOTE: If removed, allways replace the oil
seal.
1. Coat the new seal lips with the recommended
grease.
2. Position the seal on the rear cover and install
it in the bore using the proper tool.
NOTE: See “Special Tools” - use the proper
device for the transmission.