EasyManua.ls Logo

Eaton Fuller FSO-2405 - Output Sleeve, Yoke and 4 x4 Transmission Differences

Eaton Fuller FSO-2405
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
91
Output Sleeve, Yoke and 4x4
Transmission Differences
3
FSO-2405 2nd Ed. 02/07 Rear Section
FSO-2405/142
FSO-2405/143
1
FSO-2405/144
1234
567
Transmission with Output Sleeve
(used in this manual)
With the exception of some rear section parts, the
remaining transmission configuration is the same
for all other models.
4x4 Transmission
This transmission model has a shorter mainshaft
and there is neither the speedmoter sensor nor
the rotor, whose functions are not performed by
the transmission itself.
The rear housing is shorter and has a mounting
surface with holes for attaching a transfer box
(4x4).
1- Companion flange for attaching the transfer
box
Transmission with Universal Joint Yoke
This transmission model has an output yoke at the mainshaft end for coupling the drive shaft.
Both the speedometer sensor and rotor might or not be provided, depending on the vehicle
equiped with this transmission.
1- Snap ring
2- Thrust washer
3- Retaining ring
4- Rubber washer
5- Universal joint yoke
6- Rubber washer
7- Nut

Table of Contents

Related product manuals