43
Special Tools
1
FSO-2405 2nd Ed. 02/07 General Information
To properly service the Eaton FSO-2405 transmission, the following specialized tools are
recommended:
Eaton Ref. Description
E001010 Permaglide bushing installer
E001013 Universal handle
E001020 Front housing expansion plug installer
E001021 Input shaft bearing cover seal installer
E001032 Input shaft bearing cover oil baffle installer
E001033 Front housing bearing cup installer
E001034 Rear seal installer
E001035 Mainshaft bearing cup puller
E001036 Countershaft bearing cup puller
E001037 Bearing cup puller/installer support
E001038 Mainshaft bearing cup installer
E001039 Countershaft bearing cup installer
E001040 Rear seal installer
E001041 Rear seal installer
E001042 Rear seal installer
E001043 Countershaft bearing cone installer
E001044 1st/2nd, 3rd/4th and 5th/Reverse gear yoke bar pin punch
E001045 Shift lug pin punch
E003001 Slide hammer (impact puller)
E004002 Slide hammer end - for removing the expansion bushing
E005003 Pocket bearing cone puller
E005005 Thread cutter
E006002 30 mm special socket
E006003 54 mm special socket
E006004 23-spline input shaft spline socket
E006005 10-spline input shaft spline socket
E006006 54 mm special wrench
E006007 Mainshaft lock - 27 splines
E006008 Mainshaft lock - 31 splines
To Next Page
Loading...