130
Front Section Disassembly
4
Front Section 2nd Ed. 02/07 FSO-2405
FSO-2405/55
4
FSO-2405/57
1
3
Permaglide Bushing
Installation
1. Place the bushing on the proper tool.
NOTE: See “Special Tools”, Ref. E001010.
2. Position the bushing in the bushing bore and
install the bushing by hitting the tool until it rest
against the housing. This condition gives the
proper bushing depth.
3. Use a punch and lock the bushing by punching
the housing material in four positions around
the bushing bore.
WARNING! When locking the bushing, be
careful not to damage the bushing itself.
4. Apply a thin coating of recommended grease
to the bushing inner diameter.
To Next Page
Loading...