Eaton Magnefix MD4 - Assembling the Frame Legs; Fixing the Front C-Sections; Fit the C-Sectionsto the Frame; Fitting the Earth Bar to the Frame

Magnefix MD4
991.184 G01 03
23
3.3.3 Assembling the frame legs
1. Assemble the frame legs (a) (2 x 2) using the relevant
fastening materials.
1
3.3.4 Fixing the front C-sections
1. Fit the adjustable distance plates (d) and/or (e) to the
C-sections (c).
2. Fit the triple plastic cable clamp (b) to the C-
section (c).
3. For switchgear with protected panels:
Fit the cable support section (r) to the C-section (c).
1 .. 3
3.3.5 Fit the C-sectionsto the frame
1. Fit C-sections (c) to the inside of the frame leg (a).
1
3.3.6 Fitting the earth bar to the frame
1. Fit the earth bar (f) to the inside of the frame leg (a)
using a slotted tube (h).
1