Eaton Magnefix MD4 - Fitting the Branch Earth Bar; Fitting the Cross Coupling; Fitting the Second Frame Leg; Fitting the Earth Strip

Magnefix MD4
24
991.184 G01 03
3.3.7 Fitting the branch earth bar
1. Fit the branch earth bar (g) to the earth bar (f).
1
3.3.8 Fitting the cross coupling
1. Fit cross coupling (k) to the rear of frame leg (a) using
the fasteners.
1, 2
3.3.9 Fitting the second frame leg
1. Fix the second frame leg (a).
2. Fit cross coupling (k) using the fasteners.
3. Fit earth bar (f) using another slotted tube (h).
4. Set the assembled frame upright and check the
connections.
1 .. 3
3.3.10 Fitting the earth strip
1. Fit the earth strip (l) to frame leg (a) using the
fasteners (m).
1